%20(Cyan%2015%25).png)
Publications
Alhadeff, L., Curtis, D.T., Marshall, M.B. and Slatter, T. 2018. ‘The Application of Wire Electrical Discharge Machining (WEDM) in the Prototyping of Miniature Brass Gears’. Procedia CIRP 77, 642-645.
Ashworth, S., Fairclough, J.P.A., Takikawa, Y., Scaife, R., Ghadbeigi, H., Kerrigan, K, and Meredith, J. 2019. ‘Effects on machine stiffness and cutting tool design on the surface quality and flexural strength of edge trimmed carbon fibre reinforced polymers’. Composites Part A: Applied Science and Manufacturing 119, 88-100.
Ashworth, S., Rongong, J., Wilson, P., and Meredith, J. 2016. ‘Mechanical and damping properties of resin transfer moulded jute-carbon hybrid composites’. Composites Part B: Engineering 105, 60-66
Brown, M., Wright, D., M’Saoubi, R., McGourlay, J., Wallis, M., Mantle, A., Crawforth, P., and Ghadbeigi, H. 2018. ‘Destructive and non-destructive testing methods for characterization and detection of machining-induced white layer: A review paper’. CIRP Journal of Manufacturing Science and Technology 23, 39-53.
Celikag, H., Sims, N.D., and Ozturk, E. 2019. ‘Chatter Suppression in Robotic Milling by Control of Configuration Dependent Dynamics’. Procedia CIRP 82, 521-526.
Celikag, H., Sims, N.D., Ozturk, E. 2018. ‘Cartesian Stiffness Optimization for Serial Arm Robots’. Procedia CIRP 77, 566-569.
Cepero-Mejías, F., Phadnis, V.A., Kerrigan, K., and Curiel-Sosa, J.L. (In Press). 'A finite element assessment of chip formation mechanisms in the machining of CFRP laminates with different fibre orientations'. Composite Structures.
Cepero-Mejías, F., Duboust, N. Phadnis, V.A., Curiel-Sosa., and Kerrigan, K. (In Press) 'A novel approach in the modelling of edge trimming of CFRP laminates: Finite element method based assessment'. Applied Composite Materials.
Karmakov, S., Cepero-Mejías, F., and Curiel-Sosa, J.L. 2020. 'Numerical analysis of the delamination in CFRP laminates: VCCT and XFEM assessment'. Composites Part C Open Access 2, 100014.
Cepero-Mejías, F., Curiel-Sosa, J.L., Kerrigan, K., and Phadnis, V.A. 2020. 'Study of the machining induced damage in UD-CFRP laminates with various fibre orientations: FE assessment'. Procedia CIRP 87, 366-371.
Cepero-Mejías, F., Curiel-Sosa, J.L., Bláquez, A., Yu, T.T., Kerrigan, K., and Phadnis, V.A. 2020. 'Review of recent developments and induced damage assessment in the modelling of the machining of long fibre reinforced polymer composites'. Composite Structures 240, 112006.
Cepero-Mejías, F., Curiel-Sosa, J.L., Zhang, C., and Phadnis, V.A. 2019. 'Effect of cutter geometry on machining induced damage in orthogonal cutting of UD polymer composites: FE study'. Composite Structures 214, 439-450.
Cepero, F., García, I.G., Justo, J., Mantič, V. and París, F. 2019. 'An experimental study of the translaminar fracture toughness in composites for different crack growth directions, parallel and transverse to the fiber direction. Composites Science and Technology 181, 107679.
Cepero-Mejías, F., Curiel-Sosa, J.L. Kerrigan, K., and Phadnis, V.A. 2019. 'Chip formation in machining of unidirectional carbon fibre reinforced polymer laminates: FEM based assessment'. Procedia CIRP 85, 302-307.
Cepero-Mejías, F., Phadnis, V.A., and Curiel-Sosa, J.L. 2019. ‘Machining induced damage in orthogonal cutting of UD composites: FEA based assessment of Hashin and Puck criteria’. Procedia CIRP 82, 332-337.
Cepero-Mejías, F., Curiel-Sosa, J.L. and Phadnis, V.A. 2019. 'Análisis numérico de la formación de la viruta en operaciones de mecanizado de fibra de carbono'. In Congreso del Grupo Español de la Fractura 2019, 250-254.
Cepero-Mejías, F., García, I.G., Justo, J., Mantič, V., and Paris, F. 2019 'Comparación experimental de la tenacidad a fractura intralaminar en materials compuestos para crecimiento de grietas en diferentes direcciones en el plano'. In Congreso del Grupo Español de la Fractura 2019, 255-260.
Cepero Mejías, F., Curiel Sosa, J.L., and Phadnis, V.A. 2018. ‘Machining 2D FEM Study of Long Fibre Reinforced Unidirectional Laminates Using a Linear Continuum Damage Technique’. 6th Conference on Computational Mechanics, Glasgow, UK, 11-15 June 2018.
Cepero, F., García, I.G., Justo, J., Mantič, V., Paris, F. and Barroso, A. 2015. 'Comparación experimental de la tenacidad a fractura transversal de laminados unidireccionales correspondientes al crecimiento longitudinal o transversal de grietas'. Actas del Matcomp 15, 1165-1170.
Cepero, F., García, I.G., Justo, J., and Mantič, V. 2014. 'Experimental comparison between the transverse fracture toughness of a unidirectional laminate corresponding to either longitudinal or transverse crack growth'. 16th European Conference on Composite Materials, June 2014, 22-26.
Childerhouse, T., and Jackson, M. 2019. ‘Near Net Shape Manufacture of Titanium Alloy Components from Powder and Wire: A Review of State-of-the-Art Process Routes’. Metals 9:689, 1-18.
Childerhouse, T., Hernandez-Nava, E., M'Saoubi, R., Tapoglou, N., and Jackson, M. 2020. 'Surface and sub-surface integrity of Ti-6Al-4V components produced by selective electron beam melting with post-build finish machining'. Procedia CIRP 87, 309-314.
Cox, A., Herbert, S., Villain-Chastre, J-P., Turner, S., and Jackson, M. 2019. ‘The effect of machining and induced surface deformation on the fatigue performance of a high strength metastable β titanium alloy’. International Journal of Fatigue 124, 26-33
Cox, A., Villain-Chastre, J-P., Turner, S., and Jackson, M. 2016. ‘The Effect of Finish Milling on the Surface Integrity and Subsurface Microstructure in Ti-5Al-5Mo-5V-3Cr’. Proceedings of the 13th World Conference on Titanium, San Diego, California, 16-20 August 2015.
Duboust, N., Pinna, C., Ghadbeigi, H., Collis, A., Ayvar-Soberanis, S., Kerrigan, K., and Scaife, R. 2019. ‘FE modelling of CFRP machining - prediction of the effects of cutting edge rounding’. Procedia CIRP 82, 59-64.
Duboust, N., Pinna, C., Ghadbeigi, H., Ayvar-Soberanis, S., Phadnis, V.A., Collis, A., and Kerrigan, K. 2017. ‘2D and 3D Finite Element Models for the Edge Trimming of CFRP’. Procedia CIRP 58, 233-238.
Duboust, N., Ghadbeigi, H., Pinna, C., Ayvar-Soberanis, S., Collis, A., Scaife, R., and Kerrigan, K. 2017. ‘An optical method for measuring surface roughness of machined carbon-fibre reinforced plastic composites’. Journal of Composite Materials 51:3, 289-302.
Duboust, N., Melis, D., Pinna, C., Ghadbeigi, H., Collis, A., Ayvar-Soberanis, S., Kerrigan, K. 2016. ‘Machining of Carbon Fibre: Optical Surface Damage Characterisation and Tool Wear Study’. Procedia CIRP 45, 71-74.
Gibbons, T., Ozturk, E., and Sims, N.D. 2018. ‘Rotational degree-of-freedom synthesis: An optimised finite difference method for non-exact data’. Journal of Sound and Vibration 412, 207-221.
Hatt, O., Lomas, Z., Thomas, M., Jackson, M. 2018. ‘The effect of titanium alloy chemistry on machining induced tool crater wear characteristics’. Wear 408-409, 200-207.
Hatt, O., Crawforth.P., Jackson, M. 2017. ‘On the mechanism of tool crater wear during titanium alloy machining’. Wear 374-375, 15-20.
Hatt, O., Larsson, H., Giuliani, F., Crawforth, P., Wynne, B., and Jackson, M. 2016. ‘Predicting Chemical Wear in Machining Titanium Alloys via a Novel Low Cost Diffusion Couple Method’. Procedia CIRP 45, 219-222.
Jeavons, C., Baldwin, J.S., McGourlay, J., and Purshouse, R.C. 2016. ‘A Value-Focussed Decision Framework for Manufacturing Research Environments’. Proceedings of the 23rd IPSE Inc. International Conference on Transdisciplinary Engineering, Curitiba, Brazil, 3-7 October 2016.
Merino-Perez, J. L., Royer, R., Merson, E., Lockwood, A., Ayvar-Soberanis, S., and Marshall, M. 2016. ‘Influence of workpiece constituents and cutting speed on the cutting forces developed in the conventional drilling of CFRP composites’. Composite Structures 140, 621-629.
Merino-Perez, J. L., Royer, R., Ayvar-Soberanis, S., Merson, E., and Hodzic, A. 2015. ‘On the temperatures developed in CFRP drilling using uncoated WC-Co tools Part I: Workpiece constituents, cutting speed and heat dissipation’. Composite Structures 123, 161-168.
Merino-Perez, J. L., Royer, R., Ayvar-Soberanis, S., Merson, E., and Hodzic, A. 2015. ‘Induced Thermo-Mechanical Damage in the Drilling of Thermoplastic-Toughened CFRP Composites’. Proceedings of the 20th International Conference on Composite Materials, Copenhagen, Denmark, 19-24 July 2015.
Merino-Perez, J. L., Hodzic, A., Merson, E., and Ayvar-Soberanis, S. 2015. ‘On the temperatures developed in CFRP drilling using uncoated WC-Co tools Part II: Nanomechanical study of thermally aged CFRP composites’. Composite Structures 123, 30-34.
Merino-Perez, J. L., Ayvar-Soberanis, S., Merson, E., and Hodzic, A. 2014. ‘The Influence of Heat During Short Ageing Periods on the Mechanical Properties of CFRP Composites’. Proceedings of ECCM16 - The 16th European Conference on Composite Materials, Seville, Spain, 22-26 June 2014.
Merino-Perez, J. L., Ayvar-Soberanis, S., Merson, E., and Hodzic, A. 2014. ‘The Applicability of Taylors’ Model to the Drilling of CFRP Using Uncoated WC-Co Tools: The Influence of Cutting Speed on Tool Wear’. International Journal of Machining and Machinability of Materials 16:2, 95-112.
Palmer, J., Curtis, D., Novovic, D., and Ghadbeigi, H. 2018. ‘The Influence of Abrasive Grit Morphology on Wheel Topography and Grinding Performance’. Procedia CIRP 77, 239-242.
Palmer, J., Ghadbeigi, H., Novovic, D., and Curtis, D. 2018. ‘An experimental study of the effects of dressing parameters on the topography of grinding wheels during roller dressing’. Journal of Manufacturing Processes 31, 348-355.
Ray, N., Worden, K., Turner, S., Villain-Chastre, J-P., and Cross, E.J. 2017. ‘Tool wear prediction and damage detection in milling using dynamic Bayesian networks’. BSSM 12th International Conference on Advanced in Experimental Mechanics, Sheffield, UK, 29-31 August 2017.
Ray, N., Worden, K., Turner, S., Villain-Chastre, J-P., and Cross, E. J. 2016. ‘Tool Wear State Clustering in Milling Based on Recorded Acoustic Emission’. Proceedings of EACS 2016 - 6th European Conference on Structural Control, Sheffield, UK, 11-16 July 2016.
Ray, N., Worden, K., Turner, S., Villain-Chastre, J-P., and Cross, E.J. 2016. ‘Tool wear prediction and damage detection in milling using hidden Markov models’. Proceedings of ISMA 2016 including USD 2016
Ray, N., Worden, K., Turner, S., Villain-Chastre, J-P., and Cross, E. 2015. ‘Relationship between 3D tool geometry, in-process acoustic emissions and workpiece surface integrity in finish end milling’. Proceedings of the 2015 International Conference on Condition Monitoring and Machinery Failure, Oxford, UK, 9-11 June 2015.
Rooker, T., Dervilis, N., Stammers, J., Worden, K., Hammond, P., Potts, G., Brown, T., and Kerrigan, K. 2019. ‘Predicting geometric tolerance thresholds in a five-axis machining centre’. In C. Niezrecki and J. Baquersad (eds). Structural Health Monitoring, Photogrammetry & DIC, Volume 6. 36th IMAC, A Conference and Exposition on Structural Dynamics, Orlando, USA, 12-15 February 2018, 93-100.
Taylor, E., and Slatter, T. 2017. ‘Role of Temperature Parameters in Achieving Precision Traverse Cylindrical Grinding of Chrome-Plated Ferrous Metal Rolls’. Journal of Manufacturing Science and Engineering 139:12, 121012-1-121012-10.
Tipuric, M., Deastra, P., Wagg, D., and Sims, N. D. 2018. ‘Semi-active inerters using magnetorheological fluid: a feasibility study’. Proceedings of the SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, Denver, USA, 4-8 March 2018.
Tipuric, M., Wagg, D., and Sims, N.D. 2018. ‘Vibration suppression using the concept of a semi-active magnetorheological inerter device’. Proceedings of the 28th International Conference on Noise and Vibration Engineering (ISMA2018), Leuven, Belgium, 17-19 September 2018.
Tóth, M., Sims, N.D., and Curtis, D. 2019. ‘An analytical study of wheel regeneration in surface grinding’. Procedia CIRP 82, 214-219.
Wickramarachchi, C., McLeay, T.E., Ayvar-Soberanis, S., Leahy, W., and Cross, E.J. 2018. ‘Tool Wear Inspection of Polycrystalline Cubic Boron Nitride Inserts’. Special Topics in Structural Dynamics, Volume 5, 259-266.